First layers
The Best Bed Adhesives for PLA and PETG
Magigoo is the clean PLA adhesive we reach for first. A Bambu liquid glue pen is the sensible second bottle, and a Creality PVP glue stick is the cheap backup that still works.
Updated September 2026 · 3 products scored
Lena OrtizWriter
Ranked by our score
Highest overall first. Each card shows the score, star rating, standout pros, who it is for, and an Amazon link to check the current price.
- Rank 1
Top Ranked Choice
Score 8.8 out of 10
Our score
$20often $15 to $25
Magigoo
Original
The clean PLA adhesive that lets go when the bed cools
- Reliable PLA stick with a clean release when cool
- Washes off with water
Magigoo Original ranks first of 3 in this guide at 8.8/10. Built for PLA printers who are tired of glue-stick residue on PEI or glass. Ease of use is its strongest score at 9.2/10.
- Rank 2
Score 8.3 out of 10
Our score
$14.99often $10 to $20
Also greatBambu Lab
Liquid Bed Glue
The liquid pen for Bambu plates when you want a second bottle
- Pen applicator is less messy than a glue stick
- Meant for Bambu build plates
Bambu Lab Liquid Bed Glue ranks 2nd of 3 in this guide at 8.3/10. Built for Bambu owners who want a matched liquid glue and already know their plate. Ease of use is its strongest score at 8.6/10, and durability is its lowest score at 8.0/10.
- Rank 3
Score 7.5 out of 10
Our score
$8often $5 to $12
Budget pickCreality
PVP Glue Stick
The cheap PVP stick that still saves a warped PLA brim
- Lowest price here
- Familiar glue-stick application
Creality PVP Glue Stick ranks 3rd of 3 in this guide at 7.5/10. Built for Budget beds and anyone who wants a stick in the drawer for rescue prints. At $8, it is the cheapest option in this guide, and value is its strongest score at 9.2/10.
Magigoo Original
$20 often $15 to $25
Check price on AmazonThe clean PLA adhesive that lets go when the bed cools
Magigoo Original is the bed adhesive we recommend first for PLA. A thin film holds the first layer, parts release as the plate cools, and water washes the film off. It costs more per bottle than a glue stick and the Original formula is a PLA adhesive, not a universal fix for nylon or polypropylene.
Who it's for
PLA printers who are tired of glue-stick residue on PEI or glass.
Pros
- Reliable PLA stick with a clean release when cool
- Washes off with water
- A little goes a long way
Cons
- Original is for PLA, not every engineering plastic
- Pricier up front than a glue stick
Score comparison
All scores are out of 10. The overall score blends the five criteria below, weighted by what matters most in this category. See how we score.
| Product | Overall | Print quality | Durability | Value | Ease of use | Compatibility | Price | Buy |
|---|---|---|---|---|---|---|---|---|
| Magigoo OriginalOur pick | 8.8 | 9.1 | 8.0 | 8.2 | 9.2 | 8.4 | $20 | Check price on Amazon |
| Bambu Lab Liquid Bed GlueAlso great | 8.3 | 8.5 | 8.0 | 8.4 | 8.6 | 8.2 | $14.99 | Check price on Amazon |
| Creality PVP Glue StickBudget pick | 7.5 | 7.4 | 7.0 | 9.2 | 7.8 | 8.3 | $8 | Check price on Amazon |
How we compared them
We compared published specs and owner reports on first-layer hold and release for PLA and PETG on textured PEI and glass, plus how much residue a water wash leaves. These are consumables, so durability is how long a bottle or stick stays useful, not machine life.